Table of Contents
Table of Contents
Positioning Component
Positioning Square
| L (mm) | W (mm) | H (mm) |
|---|---|---|
| 200 | 175 | 50 |
- A variety of locking and positioning mode of slot structure
- The upper part pre-sets the subsequent splicing positioning plate with holes in advance
| L (mm) | W (mm) | H (mm) |
|---|---|---|
| 75 | 75 | 150 |
- The occasion when the supporting parts are fixed or different parts are connected with enough strength
- Mostly used for fixed table and foundation
Positioning Square
| D28 Series | L (mm) | W (mm) | H (mm) |
| 75 | 75 | 50 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 40 | 40 | 25 |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 175 | 75 | 50 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 90 | 40 | 25 |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 175 | 175 | 50 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 90 | 90 | 25 |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 175 | 175 | 50 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 90 | 90 | 25 |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 175 | 175 | 50 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 90 | 90 | 25 |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 275 | 175 | 50 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 140 | 90 | 25 |
Positioning Ruler
The positioning ruler has two working faces, which have the following functions:
Fixture table and all accessories are on any adjustment and accurate positioning.
The adjustment amount is a 25mm integer multiple.
Can be used for 45°, 90°, 135°, 180° positioning and clamping.
Can be used to install a quick clamp with a knuckle retaining disc.
Positioning Ruler D28 Series
| L (mm) | W (mm) | H (mm) |
| 100 | 50 | 25 |
| L (mm) | W (mm) | H (mm) |
| 150 | 50 | 25 |
| L (mm) | W (mm) | H (mm) |
| 225 | 50 | 25 |
| L (mm) | W (mm) | H (mm) |
| 300 | 50 | 25 |
| L (mm) | W (mm) | H (mm) |
| 500 | 75 | 25 |
| L (mm) | W (mm) | H (mm) |
| 800 | 75 | 25 |
| L (mm) | W (mm) | H (mm) |
| 1000 | 100 | 25 |
Positioning Ruler D16 Series
| L (mm) | W (mm) | H (mm) |
| 100 | 50 | 25 |
| L (mm) | W (mm) | H (mm) |
| 150 | 50 | 25 |
| L (mm) | W (mm) | H (mm) |
| 225 | 50 | 25 |
| L (mm) | W (mm) | H (mm) |
| 300 | 50 | 25 |
Planar Square
- Can be arbitrary adjustment and accurate positioning.
- Can be used for 45 °,90 °, 135 °, 180 ° positioning and clamping.
| D28 Series | L (mm) | W (mm) | H (mm) |
| 175 | 175 | 25 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 90 | 90 | 12 |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 275 | 225 | 25 |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 325 | 225 | 25 |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 500 | 375 | 25 |
T-type Angle Ruler
| Specification (mm) | 250 × 150 × 25 |
| 250 × 200 × 25 |
Support Angle
- Fixed hole position locking or adjustable positioning fixed locking
- Angle iron fixed after three directions can be a flexible connection
- Slot hole location for convenient connection and fine-tuning
- Standard 90-degree right Angle can be used for vertical main foundation positioning
- The extension of the fixture to the surrounding support
- The whole casting molding is beautiful, stable, and durable
- Can be an arbitrary adjustment and accurate positioning
- Flat use can be used as large positioning
| D28 Series | L (mm) | W (mm) | H (mm) |
| 275 | 100 | 300 | |
| 275 | 100 | 300 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 150 | 50 | 200 | |
| 150 | 50 | 200 | |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 375 | 100 | 600 | |
| 375 | 100 | 600 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 200 | 50 | 400 | |
| 200 | 50 | 400 | |
| D28 Series | L (mm) | W (mm) | H (mm) |
| 375 | 100 | 800 | |
| 375 | 100 | 800 | |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 400 | 50 | 600 | |
| 400 | 50 | 600 | |
U Square Box
- The convenient connection of the square box easily forms the frame structure
- A similar table foundation can be formed with different support combinations
- Effective working face 5
- Wide range of specifications, up to 4000mm
- Extra-long vertical use can use support Angle iron to increase strength
D28 Series
| L (mm) | W (mm) | H (mm) |
| 500 | 200 | 200 |
| 1000 | 200 | 200 |
| 1200 | 200 | 200 |
| 1500 | 200 | 200 |
| 2000 | 200 | 200 |
| 2400 | 200 | 200 |
| 3000 | 200 | 200 |
| 4000 | 200 | 200 |
| L (mm) | W (mm) | H (mm) |
| 500 | 400 | 200 |
| 1000 | 400 | 200 |
| 1200 | 400 | 200 |
| 1500 | 400 | 200 |
| 2000 | 400 | 200 |
| 2400 | 400 | 200 |
| 3000 | 400 | 200 |
| 4000 | 400 | 200 |
D28 Series
| L (mm) | W (mm) | H (mm) |
| 500 | 100 | 100 |
| 1000 | 100 | 100 |
| 1500 | 100 | 100 |
L Square Box
- 4 effective working surfaces
- Side of the pitch
- There are four sides, all can be modular extension and combination
- Wide range of specifications, up to 2000mm
- Extra long vertical use can use support Angle iron to increase strength
| D28 Series | L (mm) | W (mm) | H (mm) |
| 500 | 200 | 100 | |
| 1000 | 200 | 100 | |
| 1200 | 200 | 100 | |
| 1500 | 200 | 100 | |
| 2000 | 200 | 100 |
| D16 Series | L (mm) | W (mm) | H (mm) |
| 200 | 100 | 50 | |
| 300 | 100 | 50 | |
| 500 | 100 | 50 |
Frame Support
Specifications (mm): 200*200*75
Specifications (mm): 200*150*75
Specifications (mm): 200*100*75
Specifications (mm): 200*100*100
Specifications (mm): 200*150*100
Specifications (mm): 200*100*100
V type Positioning Element
- For the piece of the cong position
- Different diameter of pipe fitting to choose different angles
- V - shaped block connection into a whole and screw connection
- Material can be divided into nylon, iron
- Angle into a single, cross, combination, composite
D16 Series
| A (mm) | B (mm) | < ( ) |
| 35 | 50 | 120 |
| A (mm) | B (mm) | < ( ) |
| 50 | 80 | 120 |
D28 Series
| A (mm) | B (mm) | < ( ) |
| 180 | 80 | 90 |
| 190 | 110 | 120 |
| A (mm) | B (mm) | < ( ) |
| 50 | 58 | 120 |
| 50 | 58 | 90 |
V-type Angle Iron
Specifications (mm) 150*75*25*120°
Specifications(mm)
250*100*75*120 °
Specifications (mm)
175*100*75*90 °
Specifications (mm)
175*100*75*90 °
Specifications (mm)
175*100*75*90 °
Specifications (mm)
250*150*75*120 °
Specifications (mm)
250*100*75*120 °
Flange Positioning Plate
| D28 Flange Plate ANSI 150RF | ||
| L (mm) | W (mm) | Thickness |
| 350 | 250 | 25 |
| 550 | 350 | 25 |
- Flange plates are made in accordance with GB, JIS, ANSI, ANSI150RF, ANSI300RF, ANSI600RF and other standards
- Suitable for different pressure requirements, different pipe diameter, different national standards
Eccentric Positioning Plate
D28 Series
D16 Series
Angle Device
- Adjust any Angle from 0 to 225 degrees
- It can be used as basic locating part
- Clearly observe the Angle change of 360 degree dial
- It can be used horizontally and vertically
- Standard hole positions can be easily combined with other accessories
D28 Series
| L (mm) | W (mm) | H (mm) |
| 500 | 100 | 100 |
D16 Series
| L (mm) | W (mm) | H (mm) |
| 500 | 100 | 100 |